Image
Image

Falcon 5C

5c

Overview

The Sikama Falcon 5C is a full-featured Conduction+Convection desktop reflow oven which produces big results, and gives you exceptional value for your reflow dollar. Our patented design for balanced heating and cooling means low cost operations on production runs of substrates up to 5″ by 5.75″, and the 5C’s 400° C maximum heat will handle fluxless gold tin reflow, singulated ball reflow of BGA’s, fixtured double-sided boards, large microwave components, and various substrate materials. With conductive heating from below, convection heating from above, precise temperature control and atmospheric purity, you receive total control of your benchtop reflow oven.

You can work right-to-left or left-to-right on this semi-automatic system, so fitting the Sikama Falcon 5C into your production line easily. The 5C’s seven zones include a cooled loading platform, four Conduction+Convection heat zones and top and bottom liquid-cooled offload platform. In addition, independent set point controls for each zone offer exceptional profile flexibility and consistent, precise temperature control. Our Sweeperbar transport includes a dwell mode for timed delay of movement through any zone.

Overall, the Sikama Falcon 5C is a benchtop or desktop reflow oven offering precise temperature control with seven zones.


Typical Specification

Heating Zones 4
Cooling Zones 2
Loading Zones 1
Total Number of Zones 7
Platen Size 5 in. x 6.5 in. (125 x 162 mm)
Maximum Substrate Size 5 in. x 5.75 in. (125 x 144 mm)
Speed Mode (Inches Per Minute) 3 to 50 in/min. (7.5 to 125 cm/min.)
Time Mode (Dwell & Travel Time) 1 sec. to 99 min. 59 sec. (per zone)
Temperature (Standard) Up to 400°C
Temperature Accuracy ± 2°C
Warm-up Time to 230°C 10 minutes
Coolant Flow 0.5 to 2 GPM (2 to 8 liters/min.)
Alarms Over/Under Temperature, Gas, Coolant, Motor Torque
Parts Flow (Specify When Ordering) L to R or R to L
Gas Consumption 120-150 cubic feet per hour
O2 Level 10 PPM, 0.25 inch opening
Voltage (Specify when Ordering) 200 to 240 VAC, 50/60 Hz, 1 or 3 Phase
Start-up Power (kW) 11kW @ 240 VAC
Power Consumption 50% or less
Basic Unit Weight 200 lbs. (91 Kg)
Basic Unit Dimensions L 53 x W 25 x H 26 inches (134.6 x 63.5 x 66 cm)


Optional Equipment

Part# Description
7543 Software Package (Windows 98/2000/XP)
1281 “Sampling” Port to attach to Oxygen Monitor, Installed – 1 zone (O2 monitor not included)
Kit Zero Down Time Kit (2 Years Minimum Support)

May be added at any time – furnish serial number.