SIKAMA’s seven-zone Ultra Profile 2000 features our patented Conduction+Convection technology, combined with a cooled loading platform, four Conduction+Convection heat zones, a top and bottom liquid-cooled zone, and a liquid-cooled offload platform. Inert gas (air, nitrogen, or forming gas) surrounds the components from the top and bottom, then exits at the sides to prevent contamination of adjoining zones and eliminating flux buildup. Precise temperature controls and independent set point controls for each stage provide excellent profile flexibility.
The Ultra Profile 2000 is available as a manually loaded stand-alone system, or an automated system with a SMEMA interface, robotics, and sensors that allows you to link it to other automated assembly machines in your production line. Parts can be transported by the sweeperbars with a cycle time of less than 10 seconds. Its 400° C maximum temperature gives the Ultra Profile 2000 the flexibility to handle die soldering, BGAs, Flip Chips, and IMS with copper or aluminum bases, as well as high density components. Reflow soldering to copper, beryllium, ceramic, and glass epoxy substrates are all possible with the Ultra Profile 2000.
Economy of operation is ensured by SIKAMA’s patented balanced heating and cooling technology, with a nitrogen usage of 200 to 400 CFHg. All this capability comes with a small 38 by 43-inch footprint, which means the Ultra Profile 2000 will fit easily onto your production floor or clean room.
|Total Number of Zones||7|
|Platen Size||4.5 in. x 12 in. (114 x 305 mm)|
|Maximum Substrate Size||3.9 in. x 12 in. (100 x 305 mm)|
|Time Mode (Dwell & Travel Time)||7 sec. to 99 min. 59 sec. (per zone)|
|Temperature (Standard)||Up to 400°C|
|Temperature Accuracy||± 2°C|
|Warm-up Time to 230°C||15 minutes|
|Coolant Flow||0.5 to 2 GPM (2 to 8 liters/min.)|
|Alarms||Over/Under Temperature, Gas, Coolant, Motor Torque, SMEMA Interface|
|Parts Flow (Specify When Ordering)||L to R or R to L, Back to Front or Front to Back|
|Gas Consumption||250-350 cubic feet per hour|
|O2 Level||10 PPM, 0.25 inch opening|
|Voltage (Specify when Ordering)||200 to 240 VAC, 50/60 Hz, 1 or 3 Phase|
|Start-up Power (Kw)||11kW @ 240 VAC|
|50% or less|
|Basic Unit Weight||500 lbs. (227 Kg)|
|Basic Unit Dimensions||L 46 x W 38 x H 54 inches (L 117 x W 97 x H 137 cm)|
System serial number must accompany spare parts order