Ultra Profile 4000



If the seven zones of the Ultra Profile 2000 aren’t enough to create the profiles you need, SIKAMA’s twelve-zone Ultra Profile 4000 is the machine you’re looking for. Using the same Conduction+Convection technology as the Ultra Profile 2000, the 4000 is available in a manually operated version, and two automated versions.

The twelve zones comprise a cooled loading platform, seven Conduction+Convection heat zones, three top and bottom liquid-cooled zones, and a liquid-cooled offload platform. Each top and bottom stage combines independent set point controls for precise temperature controls and exceptional profile flexibility. The Ultra Profile shares many of the same features as the Ultra Profile 2000 and will reflow the same types of components and substrates. Balanced heating and cooling ensures cost-efficient operation, translating into production savings for your operation.

Heating Zones 7
Cooling Zones 4
Loading Zones 1
Total Number of Zones 12
Platen Size 4.5 in. x 12 in. (114 x 305 mm)
Maximum Substrate Size 3.9 in. x 12 in. (100 x 305 mm)
Time Mode (Dwell & Travel Time) 7 sec. to 99 min. 59 sec. (per zone)
Temperature (Standard) Up to 400°C
Temperature Accuracy ± 2°C
Warm-up Time to 230°C 15 minutes
Coolant Flow 0.5 to 2 GPM (2 to 8 liters/min.)
Alarms Over/Under Temperature, Gas, Coolant, Motor Torque, SMEMA Interface
Parts Flow (Specify When Ordering) L to R or R to L, Back to Front or Front to Back
Gas Consumption 500-600 cubic feet per hour
O2 Level 10 PPM, 0.25 inch opening
Voltage (Specify when Ordering) 200 to 240 VAC, 50/60 Hz, 1 or 3 Phase
Start-up Power (Kw) 17kW @ 240 VAC
Power Consumption 50% or less
Basic Unit Weight 750 lbs. (340 Kg)
Basic Unit Dimensions Inline: L 72 x W 24 x H 54 inches (183 x 61 x 137 cm)
Serpentine: L 72 x W 38 x H 56 inches (183 x 97 x 142 cm)

System serial number must accompany spare parts order